JCapper Message Board

JCapper 101
-- Pace #'s

Home	Register Log In

Pace #'s

CalvinJ
9/1/2011
5:29:10 PM

Jeff

I assume the pace numbers in the Bris PP report, are Bris provided numbers? Or have you "twicked" them, so they're somewhat different from the Bris pace numbers? I'm not asking because I'm having a problem, on the contrary, they seem to be very helpful in my assessment process. Just curious.

~Edited by: CalvinJ on: 9/1/2011 at: 5:29:10 PM~

jeff
9/1/2011
2:14:34 PM

Link to screenshot of JCapper PPs report:
http://www.jcapper.com/messageboard/avatars/crc09012011r2.jpg

The speed and pace figures appearing within each running line underneath the column headers labeled E1, E2, F3, and SPD are the E1, E2, and Late Pace figs along with the Final Time based Speed Fig as read directly from the data file (as inserted into the data file by your data vendor.)

One exception to that:

If you are using the TripNotes Module to create your own trip notes, and you are recording your own beaten lengths adjustments for individual running lines based on your own interpretation of what happened during the running of that race:

You have the option under Settings in the TripNotes module to make the final time based speed fig displayed underneath the SPD column display the data vendor's speed fig crossed out with a revised speed fig (based on your beaten lengths adjustment for that horse that race) to the immediate right.

Link to example PPs screenshot:
http://www.jcapper.com/messageboard/avatars/crc09012011r2.jpg

Link to TripNotes module Settings screenshot - specifcally the checkbox labeled Apply TripNotes Beaten Lengths Adj to Speed Figs in PPs:
http://www.jcapper.com/messageboard/avatars/tripnotesettings.jpg

-jp

.

~Edited by: jeff on: 9/1/2011 at: 2:14:34 PM~

CalvinJ
9/1/2011
5:31:05 PM

Jeff

Thanks so very much for the reply; I did learn more about this program again, not realizing numbers can be modified!! Thanks again.

JCapper Message Board

JCapper 101 -- Pace #'s

JCapper 101
-- Pace #'s